Foil compactor type Uzz 1000/90kW

TYPE UZZ 1000/90 kW

FILM COMPACTOR

Installed power 90kW.

Average hourly energy consumption 75kW.

Technical efficiency for regrind from 400 to 600 kg/h depending on the flake moisture content, where the moisture content between 15-18% is permissible in order to obtain the above efficiency, above 18% the efficiency gradually drops.

Stainless steel cladding.

Discharge hopper made of stainless steel.

Pneumatic trigger lock.

Oil mist hub lubrication.

Lubricating oil HL 46.

Pulleys on taper lock bushings.

Fixing the blade on an expansion-clamping sleeve.

Technical data.

Dimensions 1400/2500/3000mm.

Weight approximately 2400 kg.

Hub bearings 30320 pcs. 2, NU320 pcs. 2

V-belts HC 3200 pcs. 5 L=L

OPERATING DATA

Power supply 400V, F 50Hz

Installed power 90kW

Average power consumption approx. 75kW/h

Air consumption approx. 20m/h at 4 Ba

Oil consumption approx. 300ml/change.

S1 work permitted

The average bearing replacement time is 24 months.

Noise emission by the machine up to 85 dB

TECHNICAL DESCRIPTION

1. Construction part:

The device consists of five basic elements:

A. Frame - made of 120mm and 180mm C-section,

B. Tank – made of 10 mm sheet metal, thermally insulated with mineral wool and covered with 1.5 mm acid-resistant sheet metal, the steam extraction fan is not included in the machine's equipment.

C. Main engine mounting plate with V-belt tensioners HC 3200 pcs. 5,

D. Bearing assembly (hub) equipped with four bearings NU320 pcs. 2 and 32320 pcs. 2 and a seal,

E. Cutting blade with knife bases and a mounting hub equipped with an RCK 90/130 expansion-clamping ring.

1. Electrical part:

The electrical part consists of a control cabinet with a complete set of control, measurement and control devices.