Belt heaters are ideal for heating nozzles and cylinders. They are also used in other applications requiring heating cylindrical surfaces.
They come in many standard sizes. The heaters on the nozzles are divided into stainless steel or brass, while the heater on the cylinder for micanite and ceramic.
CUTTING HEADS FOR INJECTION MIRRORS
They are designed for operation up to 350 ° C. In addition, they are designed for operation at temperatures of 550-600 ° C.
The standard internal diameters of both heater models are Ø25-110 mm and the height range is 20-80 mm. The maximum surface power load is 6 W / cm2, while for models with a high power density of 12 W / cm2.
CUTTING HEADS FOR CYLINDRERS
Micronite heaters are designed for operation up to 300 ° C and ceramic up to 450 ° C.
The minimum internal diameter of both heater models is respectively Ø 55 mm and Ø 60 mm and the height range 20-400 mm and 20-600 mm.
The maximum surface power load for mikanite executions is 3.5 W / cm2 and ceramic 6 W / cm2.
The band heaters can have: holes, cutouts, integrated temperature sensor, various types of electrical connections, many types of cable insulation.
Industrial hoses, Separators, Thermoregulators, Cyclones and Fans, Drives and control, Sensors, Measuring & control equipment, Heating elements, Standarised machine elements, Plasticizing systems, Temperature regulators, Ionizers, UV technologies, Tool steels, Robots and Manipulators
Poland, 63-000 Środa Wielkopolska, Prądzyńskiego 20
