. Belt feeder for compactor
Engine power: 1.5kw
Tape width: 700mm
2. Compactor
Engine power: 55kW,
Diameter of the compactor: 800mm
Amount of cutting knives: 3 groups
Number of fixed knives: 17 pcs
Temperature sensor inside the compactor
Coating system of the compactor (water and air)
3. Single screw extruder
Snail: 38CrMoA1A, nitrided
Cylinder: 38CrMoAlA, nitrided, cylinder cooled with air;
Motor power: 90kW AC controlled by inverter
Diameter of the screw: Ø100mm;
L / D = 36: 1;
Maximum rotational speed of screws: 140rpm
The degassing system: vacuum pump: 3kw
Double degassing
Heating zones: AL heaters, air-cooled
7 heating zones,
Air cooling, cooling power: 0.37Kw × 7;
Capacity: 250 - 300kg / h
4. Hydraulic, plate changer
The diameter of the filtering surface: 200 mm
Maximum pressure: ≤35Mpa
Without stopping the extruder, without leaks, screen change time ≤ 2 seconds
Material: 38CrMoAl
Heating power: 12KW
5. Cutting in the water ring
Head material: 40Cr, nitrided
Head heating system
Rotational speed of knives: controlledinverter
Number of cutting knives: 2-4 pcs, made of W18Cr4V material
6. Centrifuge
Maximum capacity: 500kg / h
7. Vibrating table
Power of vibrator motors: 2 x 0.32kW
Segregating grid made of stainless steel
Water tank made of stainless steel
Water pump: 4 kW engine
8. Material transport system
Engine power: 3.7kW speed: 2800r / min
Diameter of the pipe: Ø100mm
Silo capacity: 1m3
Capacity: 500kg
Injector and transport pipes made of stainless steel
The tank is made of stainless steel
Presses, Single screw extruders, Double screw extruders, Extrusion lines for pipes and profiles, Mills, cruschers, Lines for mechanical recycling, Granulators, Mixers, Plasticizing systems, Sieve changers
Poland, 35-317 Rzeszów, Budziwojska 90
