No. 112062
Regranulation of a washed PET flake requires the use of precisely defined processes and solutions dedicated to this material. Due to the high hygroscopicity of the material, drying of the flake is required prior to regranulation. In our CT series lines, we install a plate dryer, which is designed to dry the PET flake immediately before feeding it to the plasticizing system.
To ensure the greatest possible transparency of the material after the granulation process, it is necessary to provide a very efficient vacuum degassing system. A vacuum degassing system appropriately matched to the machine's performance ensures that the crystallization process takes place fully, which ultimately results in a very high-quality end material. With many years of experience in the design of PET granulating machines, each time we provide our clients with a carefully selected vacuum degassing system.
A solution that we would like to draw your attention to in particular is the maintenance-free thread feeding system to the granulator. In the lines where the cut takes place "on the thread", the breaking of the threads is the most troublesome. With the traditional feeding of threads to cooling baths, the constant presence and attention of at least one operator is necessary. Thanks to the thread feeding system used by us through the water stream and a specially designed granulator, the operator's attention comes down to the control of machine and process parameters. The machine can be supervised even from another room, as long as there is a system for displaying parameters via WLAN or GSM module. Such a solution significantly reduces the costs related to employees, because even with several machines operating at the same time, one employee is enough to operate them.
Our machines are equipped with electrical components that meet the highest European standards of companies such as Siemens, ABB, Delata and Omron. This means that after the warranty period, our customers have no problem in purchasing spare parts, if they are needed. We also equip our machines with GSM modules, which often allow for remote analysis and problem solving without the need to generate costs related to a service visit.
Please do not hesitate to contact us. We are happy to answer any questions you may have.
Please visit our website:
http://argusmaszyny.pl
We invite you to watch the machine at work:
https://www.youtube.com/watch?v=U_w1tUN6pQ8
Visit our YOUTUBE channel:
https://www.youtube.com/channel/UCn7977xx_ojzL9YnAhcDlNQ/videos
Visit our Facebook page:
https://www.facebook.com/argus.maszyny. 1
Visit Instagram:
https://www.instagram.com/argusmaszyny/
ARGUS MASZYNY Sp. z o. o
ul. Soldiers of the 1st Division of the Polish Army 98,
84-230 Rumia, Poland
e-mail: barbara.litwic@argusmaszyny.pl
mobile phone: +48 533 202 141
Plastech is not responsible for the content of offers. The only owner of it is the user that published it at Plastech..
