No. 127676
Line for regranulation of plastics with a single agglomerator (with one extruder), with laser filtration - AVAILABLE ON HAND!
In this configuration of the line, the processed material is transported to the agglomerator by a conveyor belt, an optional method of feeding the film is the system of unwinding it from the roll. The motor drive of the tape feeder and the device unwinding the film from the roll are synchronized and controlled by an inverter. The speed of the feeder belt and the film extraction is fully automatic depending on the degree of filling of the compactor. There is a metal detector on the conveyor belt that will automatically stop the conveyor belt and signal the detection of metal elements.
Our single-screw extruder ensures proper homogenization of the material and its degassing.
The line is also equipped with a side feeder for additives, laser filtration and a cleanout.
The high quality of the materials used for the worm and cylinder as well as the rest of the components allows for continuous operation for a very long time.
The line is equipped with a drying system: a centrifuge and a vibrating sieve. An additional component drying the material is the blowing system for transporting the material to the buffer silo.
The type of head and the method of cutting will be selected individually.
In our machines, we use touch panels with Siemens brand software (SMART series). The installed GSM WiFi module allows our service to connect directly to the machine and diagnose the problem on-line. In many cases, this allows you to remove the fault without cost and in a very short time.
The equipment of the control cabinet consists of elements of well-known manufacturers such as Siemens, ABB, OMRON, Schneider. This provides our customers with easy access to spare parts after the warranty period. High-class electrical components also ensure efficient operation of machine protection systems against electrical overload, excessive pressure in the plasticizing system or too large temperature differences of the system from the set value.
We invite you to watch the video of the machine in operation:
https://www.youtube.com/watch?v=f7lLirIz0cY
email:biuro@argusmaszyny.pl
phone: +48 533 202 141
Please visit our websites:
https://www.instagram.com/argusmaszyny/
Plastech is not responsible for the content of offers. The only owner of it is the user that published it at Plastech..
